Ball Joints....SHOT
Moderator: hemingray
Ball Joints....SHOT
After welding back together...at least 4 serious frame cracks....My ball joints in the front wheels are completely shot....
http://216.37.204.206/wps/Polaris_OEM/P ... &A=260&B=1
CHADD....does it take a special tool to get those out??
http://216.37.204.206/wps/Polaris_OEM/P ... &A=260&B=1
CHADD....does it take a special tool to get those out??
The last words spoken before a YouTube video is filmed: "Hold my beer, now watch this..."
Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/
Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/
- Mr. Miyagi
- Forever On The trail - RIP
- Posts: 2463
- Joined: Mon Jan 12, 2004 10:39 am
- Location: Stockton
I guess maybe I should check mine.....After welding back together...at least 4 serious frame cracks....My ball joints in the front wheels are completely shot....
BTW - Don't feel bad, I blew out BOTH of my rear shocks...... Need to order new ones today.
05' Polaris Sportsman 800 EFI, 2.5 warn winch, tool box, front grill, rear bumper, gas pack, Magellan Sportrak Pro GPS and Collett radio.
02' Polaris Sportsman 700, ITP 589 m/s, K&N air filter, Polaris front and rear bumpers.
02' Polaris Sportsman 700, ITP 589 m/s, K&N air filter, Polaris front and rear bumpers.
- MrBill
- Certified: OBSESSED
- Posts: 1813
- Joined: Tue Dec 28, 2004 10:51 am
- Location: Fair Oaks, Ca.
- Contact:
Check the price these guys have.http://www.precision-aircraft.net/parts.htm
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI
- Mr. Miyagi
- Forever On The trail - RIP
- Posts: 2463
- Joined: Mon Jan 12, 2004 10:39 am
- Location: Stockton
I just took it in...I was going to do it myself...but I realized, my Bendix was screwing up too.
The guy at the shop, said he has a special tool to pull it out.
(probably a welded bolt and a hammer)
The guy at the shop, said he has a special tool to pull it out.
(probably a welded bolt and a hammer)
The last words spoken before a YouTube video is filmed: "Hold my beer, now watch this..."
Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/
Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/
- Mr. Miyagi
- Forever On The trail - RIP
- Posts: 2463
- Joined: Mon Jan 12, 2004 10:39 am
- Location: Stockton
did you notice at the bottom of the parts page is a link for ridge runners, looks like they canabulize polaris 700 and 800 and those are the parts that are left over. http://www.ridgerunner.biz/
DAVE
DAVE
- Chadd
- Forever On The trail - RIP
- Posts: 1086
- Joined: Tue Jun 21, 2005 12:50 pm
- Location: Chester Ca
- Contact:
DAVE wrote:did you notice at the bottom of the parts page is a link for ridge runners, looks like they canabulize polaris 700 and 800 and those are the parts that are left over. http://www.ridgerunner.biz/
DAVE
viewtopic.php?t=463&highlight=
2007 Can-Am 800 XT, Full skid Plates, HMF Exhaust, Dobeck EFI Controller, AKA Zuki Eater Huh Larry.
- Mr. Miyagi
- Forever On The trail - RIP
- Posts: 2463
- Joined: Mon Jan 12, 2004 10:39 am
- Location: Stockton
Damn, I forgot to check on the shocks. I only looked for the radiator grill which after shipping was the same price....
Hummmm, I got the shocks through Polaris. Looks like the shocks were about the same price as what I could have gotten the whole shock and assembly for. Oh well..... That's what I get for not paying attention.
As far as the old shocks go..... They're still on my quad..... Seems I've been working lot's of hours these days. I barely have time to mow my lawn(s).
Hummmm, I got the shocks through Polaris. Looks like the shocks were about the same price as what I could have gotten the whole shock and assembly for. Oh well..... That's what I get for not paying attention.
As far as the old shocks go..... They're still on my quad..... Seems I've been working lot's of hours these days. I barely have time to mow my lawn(s).
05' Polaris Sportsman 800 EFI, 2.5 warn winch, tool box, front grill, rear bumper, gas pack, Magellan Sportrak Pro GPS and Collett radio.
02' Polaris Sportsman 700, ITP 589 m/s, K&N air filter, Polaris front and rear bumpers.
02' Polaris Sportsman 700, ITP 589 m/s, K&N air filter, Polaris front and rear bumpers.
- Chadd
- Forever On The trail - RIP
- Posts: 1086
- Joined: Tue Jun 21, 2005 12:50 pm
- Location: Chester Ca
- Contact:
MrBill wrote:Here you go.
http://www.purepolaris.com/packages.asp ... GACatalog)
LMAO.... Or maybe these
2007 Can-Am 800 XT, Full skid Plates, HMF Exhaust, Dobeck EFI Controller, AKA Zuki Eater Huh Larry.
Who is online
Users browsing this forum: No registered users and 56 guests