heelclicker clutch for 06 800

The Way Out!

Moderator: hemingray

User avatar
extreme atv rider
Just opened an account at Cabelas
Posts: 95
Joined: Mon Mar 06, 2006 7:09 pm
Location: LP city maryland

heelclicker clutch for 06 800

Postby extreme atv rider » Wed Jul 19, 2006 3:13 pm

ok well i've got 170 miles on 800 now i've burnt two belts playin in mud and hill climbs mudzilla's great for traction not good for stock clutch set up.
i went to heel clicker web site but not listed kit for 06 got one for 05 but is it the same? any help will be great
06 sp800,pure polaris BG front & rear bumpers, 3.0 winch w/Amsteel blue, jamhard rad guard, 27" mudzilla's, quadovator temp gauge, 1" wheel spacers f, supertrapp slipon,2" lift, custom rad relocate, custom metal rear rack, epi clutch kit,

User avatar
Chadd
Forever On The trail - RIP
Posts: 1086
Joined: Tue Jun 21, 2005 12:50 pm
Location: Chester Ca
Contact:

Postby Chadd » Wed Jul 19, 2006 3:41 pm

05 800 and 06 800 are the same... you should chek out EPI they have some good kits for bigger tires...http://www.erlandsonperformance.com/new/ATV-shop.php
2007 Can-Am 800 XT, Full skid Plates, HMF Exhaust, Dobeck EFI Controller, AKA Zuki Eater Huh Larry.

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Re: heelclicker clutch for 06 800

Postby MrBill » Wed Jul 19, 2006 5:24 pm

extreme atv rider wrote:ok well i've got 170 miles on 800 now i've burnt two belts playin in mud and hill climbs mudzilla's great for traction not good for stock clutch set up.
i went to heel clicker web site but not listed kit for 06 got one for 05 but is it the same? any help will be great
Yes there are the same.
You can go with EPI There are a lot of people that like the heelclicker because you can adjust them to your needs.
You may want to sign up here and got to the heelclicker section and ask questions.
http://atvquadsquad.com/eve
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
extreme atv rider
Just opened an account at Cabelas
Posts: 95
Joined: Mon Mar 06, 2006 7:09 pm
Location: LP city maryland

Postby extreme atv rider » Wed Jul 19, 2006 5:57 pm

do both work with the ebs? and chadd whats the deal with the rear brake pedal it never wants to work going down steep hills suck usein the hand brake. i've bled the rear and it never stiffens my buddies is the same way any suggestion?
06 sp800,pure polaris BG front & rear bumpers, 3.0 winch w/Amsteel blue, jamhard rad guard, 27" mudzilla's, quadovator temp gauge, 1" wheel spacers f, supertrapp slipon,2" lift, custom rad relocate, custom metal rear rack, epi clutch kit,

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Thu Jul 20, 2006 5:51 am

extreme atv rider wrote: whats the deal with the rear brake pedal it never wants to work going down steep hills suck usein the hand brake. i've bled the rear and it never stiffens my buddies is the same way any suggestion?
Try this pump up the rear brake peddle and set a brick or large rock on it overnight. Then the next day try and bleed a little more. I think it is something about the seals need to take a set?
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
extreme atv rider
Just opened an account at Cabelas
Posts: 95
Joined: Mon Mar 06, 2006 7:09 pm
Location: LP city maryland

Postby extreme atv rider » Thu Jul 20, 2006 9:54 am

ok mr bill i'll give it a wirl see what happens
06 sp800,pure polaris BG front & rear bumpers, 3.0 winch w/Amsteel blue, jamhard rad guard, 27" mudzilla's, quadovator temp gauge, 1" wheel spacers f, supertrapp slipon,2" lift, custom rad relocate, custom metal rear rack, epi clutch kit,

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Thu Jul 20, 2006 10:41 am

extreme atv rider wrote:ok mr bill i'll give it a wirl see what happens
Hope this works for your brakes it works for others.
As for the heel clicker..
With the new weights you only need to remove the six bolt cover on the drive clutch to get to the weights and the spring. Start with the white spring that comes with the kit. then later you can get other springs for different ingagement RPM. join up to the web page i listed and you get a good discount. You get the kits from COB on that other page.


Besure to mark the clocking of the cover this is balanced I also number the bolts so they go back where they were. Use a little blue loctite on the bolts.
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Fri Jul 21, 2006 7:07 am

04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
extreme atv rider
Just opened an account at Cabelas
Posts: 95
Joined: Mon Mar 06, 2006 7:09 pm
Location: LP city maryland

Postby extreme atv rider » Wed Aug 02, 2006 5:56 am

THANKS to Mr. Bill checked out atvquadsquad got me hc kit comin great price 176.50 includin shippin . those guys over there have great forums alot like these lots of help.....
06 sp800,pure polaris BG front & rear bumpers, 3.0 winch w/Amsteel blue, jamhard rad guard, 27" mudzilla's, quadovator temp gauge, 1" wheel spacers f, supertrapp slipon,2" lift, custom rad relocate, custom metal rear rack, epi clutch kit,

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Wed Aug 02, 2006 7:34 am

Good deal.
Did that little trick work on the rear brake?
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
extreme atv rider
Just opened an account at Cabelas
Posts: 95
Joined: Mon Mar 06, 2006 7:09 pm
Location: LP city maryland

Postby extreme atv rider » Wed Aug 02, 2006 1:24 pm

sure did brake works great for now it's been so hot and i've been workin so i haven't had lot of time too ride. i'm going this wekend so we'll see what happens
06 sp800,pure polaris BG front & rear bumpers, 3.0 winch w/Amsteel blue, jamhard rad guard, 27" mudzilla's, quadovator temp gauge, 1" wheel spacers f, supertrapp slipon,2" lift, custom rad relocate, custom metal rear rack, epi clutch kit,


Who is online

Users browsing this forum: No registered users and 16 guests