no brakes!

The Way Out!

Moderator: hemingray

OG LARRY
ATV Obsession Rider
Posts: 15
Joined: Mon Jun 12, 2006 10:20 pm
Location: Half Moon Bay

no brakes!

Postby OG LARRY » Mon Jun 19, 2006 9:55 pm

hey , can anyone help me out here? this has been a problem ive had for a couple years now. i head up to the trails everything fine and half way through my ride my hand break just goes flat, completely no pressure.my foot break works fine though. have full fluid , breaks been bled, just goes on me. anyone have this problem or know what to do to fix it? btw, its a 2002 sportsman 700, any help be appreciated

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Tue Jun 20, 2006 10:59 am

2006 800 Sportsman :lol:
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
Chadd
Forever On The trail - RIP
Posts: 1086
Joined: Tue Jun 21, 2005 12:50 pm
Location: Chester Ca
Contact:

Postby Chadd » Tue Jun 20, 2006 11:28 am

MrBill wrote:2006 800 Sportsman :lol:
AAHHH the cure all...lol
2007 Can-Am 800 XT, Full skid Plates, HMF Exhaust, Dobeck EFI Controller, AKA Zuki Eater Huh Larry.

User avatar
Ken
Site Admin
Posts: 7501
Joined: Wed Jan 07, 2004 4:23 pm
Location: Auburn, CA
Contact:

Postby Ken » Tue Jun 20, 2006 11:50 am

LOL...

I've seen this happen...he's fine for awhile....then it gets soft. You think it's a problem with the master cylinder?

His rear brake is not affected, since it has it's own resevoir.
The last words spoken before a YouTube video is filmed: "Hold my beer, now watch this..."

Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Tue Jun 20, 2006 11:55 am

Works and does not work.
Sounds like air trapped somewhere.
A big bottle of DOT 3 is a lot cheaper than a master cylinder. Polaris does not sell seal kits for the brake cylinder.
I would keep bleeding those brakes before I would give up.
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Tue Jun 20, 2006 12:55 pm

When bleeding if you choose to..
Try bleeding the outlet line up on the master cylinder also.
Lay a towel over the fender DOT 3 will stain the plastic and will remove that Armer All from the bling bling kitty paw tires :lol:
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

Ken's700
Is tracking a shipment right now
Posts: 115
Joined: Mon May 30, 2005 8:18 am
Location: Salina, KS

Postby Ken's700 » Tue Jun 20, 2006 4:02 pm

Chad,
Is this a defective master cylinder on the handlebar or just a bad reservoir seal?

I had our 05/700's changed twice (under warranty) and there is still a problem with one of them.
(now out of warranty)
Quads No More :(

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Fri Jun 30, 2006 1:19 pm

04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

User avatar
Ken
Site Admin
Posts: 7501
Joined: Wed Jan 07, 2004 4:23 pm
Location: Auburn, CA
Contact:

Postby Ken » Fri Jun 30, 2006 3:05 pm

The seller is the same that sold Steve his 800.
The last words spoken before a YouTube video is filmed: "Hold my beer, now watch this..."

Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/

OG LARRY
ATV Obsession Rider
Posts: 15
Joined: Mon Jun 12, 2006 10:20 pm
Location: Half Moon Bay

Postby OG LARRY » Sat Jul 01, 2006 10:59 pm

thnx bill, ken is bidding for it for me as we speak, hopefully well get it, think it might be air in the system of some sort .even if i do get it sorted out , be nice to have a spare cylinder, never know what kinda mishaps will hit you on the trails! :shock:

User avatar
Ken
Site Admin
Posts: 7501
Joined: Wed Jan 07, 2004 4:23 pm
Location: Auburn, CA
Contact:

Postby Ken » Sat Jul 01, 2006 11:51 pm

OG LARRY wrote: never know what kinda mishaps will hit you on the trails! :shock:
Image

Yup...never know. :)
The last words spoken before a YouTube video is filmed: "Hold my beer, now watch this..."

Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/

User avatar
Ken
Site Admin
Posts: 7501
Joined: Wed Jan 07, 2004 4:23 pm
Location: Auburn, CA
Contact:

Postby Ken » Sun Jul 02, 2006 9:56 am

Larry....we got out bid at $86.


At the store, it's $159. Call me with your limit. I think it's going to go for around 115-125..personally.


Chadd....what can you get one for?
The last words spoken before a YouTube video is filmed: "Hold my beer, now watch this..."

Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/

OG LARRY
ATV Obsession Rider
Posts: 15
Joined: Mon Jun 12, 2006 10:20 pm
Location: Half Moon Bay

Postby OG LARRY » Mon Jul 03, 2006 2:58 pm

i remember that spot :!: it didnt look like anything at night but i looked at it the next day and that is actually a cliff with a pretty far drop, woulda been curtains for sure :!: and as i remember what got me in that situation was ken was arriving late with trailer and we met them on the road, and another truck was coming other way so we had to get on the edge of the road to make room. always the easy spots, eh?

User avatar
MrBill
Certified: OBSESSED
Posts: 1813
Joined: Tue Dec 28, 2004 10:51 am
Location: Fair Oaks, Ca.
Contact:

Postby MrBill » Fri Jul 07, 2006 7:52 pm

You might want to pull your pants up a little :oops:
04 500 HO SP w/ the RZR bling rims/tires and 2 03 Bomber GTX DI

OG LARRY
ATV Obsession Rider
Posts: 15
Joined: Mon Jun 12, 2006 10:20 pm
Location: Half Moon Bay

Postby OG LARRY » Fri Jul 07, 2006 8:38 pm

hey, dont hate me cause im beautiful :lol:


Who is online

Users browsing this forum: No registered users and 42 guests